Cremorne Drain Cleaning, Done Properly

Drain cleaning clears the pipe properly, not just enough to get water moving again.

High-pressure water jetting. A jetter scours the full pipe wall clean of grease, scale and silt, rather than just punching a channel through the middle.

Root cutting. A cutting head fitted to the jetter shears roots back to the pipe wall, buying real time before they return.

Grease and fat clearing. Kitchens and cafes build up fat deposits that narrow a pipe gradually until it closes over.

Electric eel for solid clogs. Where a single object or solid mass is the problem, the eel is the more direct tool.

Scheduled maintenance cleans. Strata lines and commercial kitchens can lock in a recurring visit instead of waiting for the next blockage.

If the drain's actually cracked or collapsed rather than just clogged, that's blocked drain repair instead of a clean.

What's clogging a Cremorne drain often comes down to what the house is actually built from.

Older housing around Young Street tends to be brick and rendered construction from the pre-1940 and mid-century waves, sitting on original drainage that narrows with age regardless of what goes down it.

The apartment stock built since the 2000s runs newer uPVC pipework, which handles routine grease and debris better, but still needs a jetter through it on a schedule in busier buildings.

Render and double-brick construction doesn't affect what's inside the pipe directly, but it does affect access. Older render often sits close to where a drain line runs, so we plan around it rather than through it.

That distinction matters more than most homeowners realise. A crew unfamiliar with double-brick construction can end up chasing the wrong wall cavity looking for an access point that was never there to begin with.

1. Assess the blockage. We work out what's actually built up in there before picking a tool.

2. Jet or clear, matched to the cause. The jetter handles grease, scale and roots; the eel handles solid clogs directly.

3. Confirm with a flow test. Water gets run through afterward to prove the pipe is genuinely clear, not simply running better for the moment.

4. Camera check on repeat jobs. Anywhere that's blocked before gets a camera look to rule out a bigger issue.

Once a job goes beyond a simple plunge, NSW treats it as licensed plumbing work, and jetting or root cutting both sit under that rule.

Everything from the house to the boundary shaft is the owner's to have cleaned; the network under the street takes over from there.

Our team works under NSW plumbing licence #275278C on every clean, whether it's a single house or a scheduled commercial line.

We're jetting and clearing drains all over Cremorne, whether that's the older brick housing near Young Street or a busy kitchen closer to the Junction shops.

Neighbouring Neutral Bay, Cammeray and Kirribilli are on our regular run as well.